Skip to content
LordesDevelopment
Impact window installation on a Miami property

Our Services

Impact Window & Door Services in Miami & South Florida

Impact window installation, replacement, and weatherproofing for homes, condos, and investment properties.

Window problems become expensive when they are not handled correctly. We deliver protection, correct installation, and clean finish work.

What's Included

Window Services

  • 01Impact window and door installation
  • 02Full replacement of existing units
  • 03Waterproofing and weatherproofing details
  • 04Permit and inspection coordination
  • 05Stucco, trim, and interior finish repair
  • 06HOA and condo association coordination

What impact window replacement involves

Replacing windows in South Florida is structural work, not a product swap. Miami-Dade and Broward are the High-Velocity Hurricane Zone, one of the most demanding wind codes in the country: every window and door must carry a product approval for the pressures at that opening, be anchored into the structure the way its approval specifies, and be inspected.

The glass is the part people shop for. The part that keeps water and wind out is the installation — the anchoring, the flashing and the sealant joint between the frame and the wall — and that is where we put the attention.

Product approvals and design pressures

Each opening has a required design pressure that depends on the height of the building, its exposure and where the opening sits on the façade; corners and upper floors see the highest loads. The unit installed there must have a Miami-Dade Notice of Acceptance or a Florida Product Approval for at least that pressure, at that size. A window approved at one size is not automatically approved at a larger one.

Beyond the rating, the choices that change daily life are the glass and the frame: laminated insulated glass with a low-E coating cuts heat and noise noticeably, and aluminium frames are the standard on the coast, with finishes rated for salt air.

Permits, condominiums and HOAs

Window and door replacement requires a permit and inspections in every South Florida municipality, filed by the licensed installer. The submission includes the product approvals and the pressure calculations for each opening. Lead times on impact units run from several weeks to a few months, so nothing is scheduled until the order is confirmed.

In a condominium the façade is shared. The association usually dictates frame colour, glass tint and configuration, and may require its engineer's approval. In a high-rise, units are often installed from the inside, and hoisting, protection and work hours are set by the building. We handle those approvals as part of the job.

Installation and waterproofing

The old unit comes out and the opening is inspected: in older block houses the sill and the wood bucks are often rotted or out of level and need rebuilding before anything new goes in. The new unit is set, shimmed, anchored at the spacing its approval requires, and sealed with backer rod and a sealant joint sized to move. Then stucco, trim, sills and interior drywall and paint are repaired, so the opening looks as if the window had always been there.

Insurance and energy

Protecting every opening — windows, doors, sliders and the garage door — can qualify a home for wind-mitigation credits on its insurance premium, documented with a wind-mitigation inspection after the work. Partial protection generally does not earn the opening-protection credit, which is worth knowing before deciding to do half the house. Impact glass with a low-E coating also lowers cooling loads, and it retires the shutters for good.

How long window replacement takes

Measurement, approvals and the permit take three to six weeks; manufacturing takes six to sixteen weeks depending on the product and the season. Installation of a typical house takes three to five days, plus finish repairs and the final inspection. We give you the whole calendar at the start, and we do not remove a window until its replacement is on site.

Investment

What impact windows cost in Miami

Impact windows and doors are priced per opening, by size, type and design pressure. These are the ranges where our projects usually land in 2026, installed.

  • Standard windows

    $1,400 – $2,800 per opening

    Single-hung, horizontal roller and fixed impact windows in common sizes, installed, with finish repairs.

  • Sliding and French doors

    $4,500 – $12,000 per opening

    Impact sliding glass doors and hinged doors, depending on width, height and number of panels.

  • Large and custom openings

    $12,000 – $35,000+ per opening

    Floor-to-ceiling glass, multi-panel sliders, corner units and high design pressures on upper floors.

What moves the number

  • Size and type. A fixed window, an operable one and a sliding door are three different products.
  • Design pressure. Upper floors, corners and coastal exposure need stronger units.
  • Glass. Insulated, low-E, tinted or laminated for sound.
  • The opening. Rotted bucks, uneven sills, and stucco or tile repairs around it.
  • Access. High-rise installation, hoisting and condominium rules.

Planning ranges for supplied and installed impact units in Miami-Dade and Broward, including permit coordination and finish repairs. Your budget is defined opening by opening after a field measure.

Our Process

How we work, step by step

  • 01

    Survey & Measure

    Every opening measured individually. Openings in older buildings are rarely the same size twice.

  • 02

    Product & Approvals

    Impact units specified for the exposure, plus HOA or condo association approval where the façade is shared.

  • 03

    Permit Coordination

    Filing coordinated with the licensed installer, and lead times confirmed before we book the install.

  • 04

    Installation

    Old units out, new units set, anchored and flashed. Watertightness is decided here, not at the caulk stage.

  • 05

    Finish & Inspection

    Stucco, trim and interior finishes repaired around each opening, then the inspection walked through.

Selected Work

Glazing in recent projects

Window Services

Questions we get asked

  • How much do impact windows cost in Miami?

    Installed, most standard impact windows run $1,400 to $2,800 per opening and sliding or French doors $4,500 to $12,000. Large, custom and high-rise openings run higher. We price each opening after measuring it.

  • Do I need a permit to replace windows in Miami-Dade or Broward?

    Yes. Window and door replacement is permitted and inspected in every municipality, and the permit is filed by the licensed installer with the product approvals for each opening.

  • What is a Notice of Acceptance (NOA)?

    It is Miami-Dade County's product approval. It states the sizes, the design pressures and the installation method a window or door was tested for. In the High-Velocity Hurricane Zone, a unit needs an NOA or a Florida Product Approval valid for that zone.

  • Will impact windows lower my insurance?

    They can. Insurers in Florida give wind-mitigation credits when every opening is protected, documented by a wind-mitigation inspection. Ask your agent what applies to your policy before deciding how much of the house to do.

  • How long does window replacement take?

    Three to six weeks for measurement, approvals and permit, six to sixteen weeks of manufacturing, and three to five days of installation for a typical house.

  • Can I replace the windows in my condo?

    Usually, with the association's approval. The building generally sets the frame colour, the tint and the configuration, and installation follows its rules for access and work hours.

  • Do I still need shutters?

    No. Approved impact windows and doors are the opening protection; shutters are not required over them.

Ready to start your window services project?